|
|
![](../../image/en/D/titleD.gif) |
HOME>Product Introduction > Automatic Roll-Slicing Machine CT6-1A
![](../../image/line2.gif) |
|
Application
Suitable for the slicing of PVC, kraftpaper, cloth material, OPP, and electrical tapes and paper cores.
Special Features
-
Self-diagnostics and fault indication to minimize troubleshooting down-time.
-
PLC control with operator screen for simple and swift operation.
-
Cutting shaft driven by frequency controlled AC motor allowing stepless rotational speed adjustment.
-
Operation settings and cutting widths user-storable in memory. High precision indexing by servo motor driving a precision ball screw.
-
Hydraulically actuated knife unit for smooth cutting.
|
|
Specifications
|
CT6-700-1A |
CT6-1300-1A |
CT6-1600-1A |
Maximum cut roll width |
700 mm |
1300 mm |
1600 mm |
Minimum cut roll width |
2.5 mm |
2.5 mm |
2.5 mm |
Inner diameter of paper tube |
25~77 mm |
32~77 mm |
38~77 mm |
Maximum cut roll diameter |
1800 mm(3" I.D. paper tube) |
1800 mm(3" I.D. paper tube) |
1800 mm(3" I.D. paper tube) |
Roll cutting speed |
3~15 cuts/min |
3~15 cuts/min |
3~15 cuts/min |
Supply air pres-sure requirement |
5.5kgf/cm2 |
5.5kgf/cm2 |
5.5kgf/cm2 |
|
Top
|
|
![](../../image/logo_jpeg.jpg) |
| About | Product | Contact | Home |
| No.14, Ln. 61, Sec. 1, Guangfu Rd., Sanchong Dist., New Taipei City 241, Taiwan (R.O.C.) | Tel:(02)8512-2546 | Fax:(02)2995-7008 | |
|
|